FAST DELIVERY normally 1-3 working days!

FLEXIBLE WIDTHS available in 1, 2, 3 & 4m widths

FREE SAMPLES we offer free grass samples!

Artificial Grass Multipurpose Glue 10 Kg Tub 2 Part. Ideal For Upto 25 Linear Metres.

Specialised artificial grass glue /10 Kg tube of adhesive with hardener, to be used in conjunction with our 200 mm wide seaming tape. (Sold separately).
We recommend 1 tub to cover up to 25 linear metres on seaming. INTRODUCTION Sport-Fix Multi Purpose Adhesive is a two component polyurethane based adhesive system primarily designed for bonding artificial grass carpets to our special seam jointing tapes to produce a strong invisible joint along the carpet joins. FEATURES • Suitable to bond all carpet and tape combinations. • Solvent free non-flammable adhesive. • Structured non-slumping consistency. • Fast cure time. • Versatile over 5 - 30ºC. • Bonds generally far stronger than the materials used. • Tolerates use in damp weather conditions. METHOD OF USE IMPORTANT: Before embarking on any work involving Sport-Fix Multi Purpose Adhesive the Health and Safety Data Sheet should be carefully studied by those carrying out the work. MIXING PROCEDURE Sport-Fix Multi Purpose is mixed thoroughly with the Hardener Additive at a ratio of 10:1 by weight by first adding the hardener component to the adhesive component in the plastic tub. Mixing in all cases should be carried out thoroughly by using a mechanical stirrer, for example a powerful drill with a suitable mixing head. Poorly mixed adhesive does not cure correctly and remains soft. It is therefore essential that mixing of the two components is complete particularly around the sides and the bottom of the tub. APPLICATION METHODS Before use, individual substrates should be evaluated for bonding performance prior to any large-scale application. The mixed adhesive should never be applied onto wet substrates as this interferes with the curing system and will result in inferior bonds. However Multi Purpose Adhesive is tolerant to use in damp weather conditions. SEAM BONDING THE EDGES OF SYNTHETIC GRASS CARPETS The mixed adhesive is poured from the tub directly down the centre of the tape, or into a suitable application machine. The adhesive is then spread by notched trowel (this allows the adhesive to stand up in ridges) across a width of 250 mm, leaving a 25 mm strip uncoated at each edge of the tape. Sport-Fix Multi Purpose is suitable for bonding all synthetic grass carpets to geo-textile tapes and a mixed set of 11.0 kg will bond down a seam length of 15 to 25 metres. It is important that sufficient adhesive is applied to transfer onto the carpet back when this is pressed into position and should effectively fill the gaps between the stitches. Therefore coverage can be down to 15 m per set on some types of the very long pile carpet. The seam can be lightly rolled after making the joint and subsequently re-rolled when the adhesive is setting to a high viscosity mastic appearance (normally 1 - 2 hours). Another method commonly used is to hold the seams in place by weighting the carpet with dry sand or planks until the adhesive has cured. The adhesive will normally partially cure in 1 - 2 hours at average spring/autumn temperatures, but this time can be considerably extended at lower temperatures.

£47.50
5 In Stock - ready for delivery
Our Artificial Grass Guarantee
Child & Pet Friendly
Flame Retardant
10 Year UV Warranty
High Grade Materials

CTERISTICS
Colour & Form: Grass-green paste.
Characteristics: 2 component polyurethane-reaction adhesive
for outdoor use.
Specific Gravity: 1480 g/litre.
Viscosity: Thixotropic.
Solids: 100%.
Application: Notched trowel or by suitable machine for applying
to Seaming Tape.
Open/Cure Time: Ambient Open Time Cure Time
Temperature ºC
5 4 hours 24 hours
10 2 hours 12 hours
20 1 hours 4 hours
30 30 minutes 2 hours
Do not use if risk of ground frost before
completion of setting time.
Coverage: 2000 – 3000g/m2 for seam jointing.
Setting Time: Approximately 1 – 24 hours depending
on ambient temperature.
Cure Time: Final strength after 4 days.
Cleaning: Hot water plus detergent will remove (wet) adhesive
from hands and tools. Cured adhesive is solvent
resistant and is removable only by mechanical means.
Film Resistance: Water and temperature resistant.
Packaging: 13.2kg, 11kg and 5.5kg sets as stock items.
Supplied as separate components
or in a single combination pack.
Storage: Keep containers tightly sealed between 5 – 30ºC.
Shelf Life: 12 months for both Adhesive and Hardener.
Warning: When working with hardener, the warning and safety
precautions on the containers should be observed.
Envirostik Hardener is a 100% liquid isocyanate.
Avoid contact with skin. Wear protective gloves.
HEALTH & SAFETY
Before embarking on any work ensure you are supplied with the relevant
Safety Data Sheet and have read carefully the following information.
1) The hazard label on the container (complying with Chip 3 Regs 2002
& CDG/CPL Regs).
2) The Envirostik Material Safety Data Sheet for Sport-Fix
Multi Purpose Adhesive.
This leaflet is for general guidance only and may contain inappropriate
information under particular conditions of use. The company cannot accept
any responsibility for loss or damage that may result from the use of this
information, due to the possibility of variations of processing or working
conditions and of workmanship outside our control. Users are advised
to confirm the suitability of this product by their own tests.
I

CTERISTICS
Colour & Form: Grass-green paste.
Characteristics: 2 component polyurethane-reaction adhesive
for outdoor use.
Specific Gravity: 1480 g/litre.
Viscosity: Thixotropic.
Solids: 100%.
Application: Notched trowel or by suitable machine for applying
to Seaming Tape.
Open/Cure Time: Ambient Open Time Cure Time
Temperature ºC
5 4 hours 24 hours
10 2 hours 12 hours
20 1 hours 4 hours
30 30 minutes 2 hours
Do not use if risk of ground frost before
completion of setting time.
Coverage: 2000 – 3000g/m2 for seam jointing.
Setting Time: Approximately 1 – 24 hours depending
on ambient temperature.
Cure Time: Final strength after 4 days.
Cleaning: Hot water plus detergent will remove (wet) adhesive
from hands and tools. Cured adhesive is solvent
resistant and is removable only by mechanical means.
Film Resistance: Water and temperature resistant.
Packaging: 13.2 kg, 10 kg and 5 kg sets as stock items.
Supplied as separate components
or in a single combination pack.
Storage: Keep containers tightly sealed between 5 – 30ºC.
Shelf Life: 12 months for both Adhesive and Hardener.
Warning: When working with hardener, the warning and safety
precautions on the containers should be observed.
Envirostik Hardener is a 100% liquid isocyanate.
Avoid contact with skin. Wear protective gloves.
HEALTH & SAFETY
Before embarking on any work ensure you are supplied with the relevant
Safety Data Sheet and have read carefully the following information.
1) The hazard label on the container (complying with Chip 3 Regs 2002
& CDG/CPL Regs).
2) The Envirostik Material Safety Data Sheet for Sport-Fix
Multi Purpose Adhesive.
This leaflet is for general guidance only and may contain inappropriate
information under particular conditions of use. The company cannot accept
any responsibility for loss or damage that may result from the use of this
information, due to the possibility of variations of processing or working
conditions and of workmanship outside our control. Users are advised
to confirm the suitability of this product by their own tests.
I

"I ordered in your office and found everybody very helpful, product arrived as promised and well packaged"
- Kent
"Can I just say, what excellent service! The artificial turf arrived today (one day after the order was placed ) and the quality is superb."
- Kent

Frequently Asked Questions

What maintenance will Artificial Turf need?
What maintenance will Artificial Turf need?
Read more frequently asked questions

This Artificial grass Tub including hardener covers up to 25 linear metres per cartridge stick. Best applied with a spreader.

This should also be used in conjunction with our specialised seaming tape, also available from Forever Green Lawns.

Protective use of gloves is advised when using this product, as removal of any residue from hands can take several days.

Fold back both pieces of artificial grass, roll out the seaming tape and place between the two pieces in the middle, then, roll out the seaming tape with the dark green side facing down, cut to the required length, apply the glue using the spreader onto the lighter side, spread out evenly. (An off-cut of the grass can be used, use the underside for best spreading results). Then carefully and together if possible fold back the artificial grass onto the glue and tape and press down hard along the seam.

To apply the artificial grass adhesive you will require a spreader. If you require glue, seaming tape or membrane only, please contact us directly on 0800 668 1958 or 01732 323122.