Panama – 40mm Pile, Premium Luxury Range PRE ORDER FOR MAY 2024

Installation Method

View our artificial grass installation method here.

There are many ways to install artificial grass, we have listed below 4 tried and tested methods;

Installation method 1.

• Cut up the existing lawn to the required depth.
• Level the area ready for the sand aggregate to be laid.
• Screed over and compact the area with a 20mm layer of grit sand.
• Pin down a heavy duty permeable membrane over the sand to act as a weed barrier,
• Lay, trim & cut to size the artificial grass.
• Pin down the grass around the perimeter of the garden with 6? galvanised pins.
• Brush up the grass pile with heavy-duty brushes or AGM electric power brush.

Installation method 2.

• Cut up the existing lawn to the required depth.
• Level the area ready for the sand aggregate to be laid.
• Insert a treated edging around the perimeter to secure the membrane & grass onto.
• Screed over and compact the area with a 20mm layer of grit sand.
• Secure onto the framework a heavy duty permeable membrane over the sand to act as a weed barrier,
• Lay, trim & cut to size the artificial grass.
• Secure the artificial grass onto the treated timber frame-work with either galvanised screws or staple gun.
• Brush up the grass pile with heavy-duty brushes or AGM electric power brush.

Installation method 3.

• Cut up the existing lawn to the required depth.
• Level the area ready for the aggregates to be laid.
• Insert a treated timber edging around the perimeter to secure the membrane & grass onto.
• Compact down a type 1 crushed limestone aggregate to form a firm base between 30/40mm and to assist with future drainage.
• Over the type 1 aggregate lay a 10mm screed of builder’s sand & compact.
• Secure onto the framework a heavy duty permeable membrane laid over the sand & type 1 to act as a weed barrier.
• Lay, trim & cut to size the artificial grass.
• Secure the artificial grass onto the treated timber frame-work with either galvanised screws or staple gun.
• Brush up of the grass pile with heavy-duty brushes or AGM electric power brush.

Installation method 4.

• Cut up the existing lawn to the required depth.
• Level the area ready for the aggregates to be laid.
• Insert a treated timber edging around the perimeter to secure the membrane & grass onto.
• Compact down a type 1 aggregate 6mm to dust (sometimes referred to as grano) to form a firm base between 40/50mm and to assist with future drainage.
• Secure onto the framework a heavy duty permeable membrane laid over the 6mm to dust  type 1 to act as a weed barrier.
• Lay, trim & cut to size the artificial grass.
• Secure the artificial grass onto the treated timber frame-work with either galvanised screws or staple gun.
• Brush up of the grass pile with heavy-duty brushes or AGM electric power brush.