Green round headed galvanised fixing nails

Our Artificial Grass Guarantee

Child & Pet Friendly

Flame Retardant

10 Year UV Warranty

High Grade Materials

Technical Data Sheet

These 150 mm x 5 mm green round headed galvanised nails are specifically designed for securing around your artificial grass edge if you have decided not to insert a timber edging onto which your artificial grass is fixed. These pins will be ideal for the job required.

This pack contains 20 nails per bag. Use is very simple, just hammer in a nail/pin every 15 – 20 cm around the perimeter of your lawn. Suitable for use in hard ground and all major fixings. You can pin down using shorter or wider spaces in between, however 15/20 cm is our recommended gap.

Please ensure that your artificial lawn is stretched out before securing down. After fixing in ensure that the blades of the grass are not caught under the nail, as this can result in a small bare patch showing. The pins should be completely invisible to the eye when looking.

"I ordered in your office and found everybody very helpful, product arrived as promised and well packaged"

- Kent

"Can I just say, what excellent service! The artificial turf arrived today (one day after the order was placed ) and the quality is superb."

- Kent

Frequently Asked Questions

Read more frequently asked questions

View our artificial grass installation method here.

Installation method 1.

Cut up the existing lawn to the required depth.
Make the area ready for the sand aggregate to be laid.
Screed over and compact the area with a 20mm layer of grit sand.
Pin down a heavy duty permeable membrane over the sand to act as a weed barrier,
Lay, trim & cut to size the artificial grass.
Pin down the grass around the perimeter of the garden with 6″ galvanised pins.
Brush up the grass pile with heavy-duty brushes or AGM electric power brush.

Installation method 2.

Cut up the existing lawn to the required depth.
Make the area ready for the sand aggregate to be laid.
Insert a treated edging around the perimeter to secure the membrane & grass onto.
Screed over and compact the area with a 20mm layer of grit sand.
Secure onto the framework a heavy duty permeable membrane over the sand to act as a weed barrier,
Lay, trim & cut to size the artificial grass.
Secure the artificial grass onto the treated timber frame-work with either galvanised screws or staple gun.
Brush up the grass pile with heavy-duty brushes or AGM electric power brush.

Installation method 3.

Cut up the existing lawn to the required depth.
Make the area ready for the aggregates to be laid.
Insert a treated timber edging around the perimeter to secure the membrane & grass onto.
Compact down a type 1 crushed limestone aggregate to form a firm base and to assist with future drainage.
Over the type 1 aggregate lay a 10mm screed of builder’s sand & compact.
Secure onto the framework a heavy duty permeable membrane laid over the sand & type 1 to act as a weed barrier.
Lay, trim & cut to size the artificial grass.
Secure the artificial grass onto the treated timber frame-work with either galvanised screws or staple gun.
Brush up of the grass pile with heavy-duty brushes or AGM electric power brush.

150mm x 5mm Green Round Headed Galvanised Fixing Nails.

Frequently Asked Questions